How to Get Water Out of Charging Port

Our smartphones, tablets, and laptops have become a part of our daily lives, and for many, it’s difficult to imagine being without them. However, one of the most common problems that arise with these devices is the issue of water finding its way into the charging port. Not only is it frustrating when you can’t charge your device, but it’s also a safety hazard. Here are some easy and effective ways to remove water from charging ports and get your device up and running again.

Use a Dry Toothbrush or Cotton Swab

The easiest way to remove water from a charging port is to use a dry toothbrush or cotton swab to gently remove any water droplets stuck in the port. It’s crucial to be delicate when cleaning to avoid damaging the port. Here’s how you can clean the port using a dry toothbrush or cotton swab:

1. Turn off your device to prevent short-circuiting
2. Gently brush the charging port with a dry toothbrush or swipe the cotton swab around the edges of the port
3. Continue to gently brush or swipe until any water droplets are removed
4. Let the port air dry completely before plugging in any charger or cord

Leave the Device in a Dry, Warm Spot

Another way to remove water from a charging port is to let the water evaporate on its own. This method can be effective, especially if the port is not too wet. Here are the steps to follow:

1. Turn off your device
2. Remove any protective cases or coverings
3. Find a dry, warm location to place your device in, such as a sunny window or near a radiator
4. Let the device sit in the dry spot for at least 4-6 hours or overnight to ensure that it is completely dry

Use a Hairdryer on Low Heat

If there is still water in the charging port after using a dry toothbrush or leaving the device in a dry spot, you can use a hairdryer to gently blow air into the port. Here’s how:

1. Turn off your device
2. Set the hairdryer to low heat
3. Hold the dryer at least one foot away from the device to avoid overheating or damaging it
4. Gently blow air into the charging port
5. Continue to blow air until any water droplets are removed
6. Let the port air dry completely before plugging in any charger or cord

Use a Moisture-Absorbing Substance

Rice or silica gel packs are effective at drawing moisture out of the charging port. Here’s how to do it:

1. Turn off your device
2. Remove any protective cases or coverings
3. Fill a small bowl with rice or silica gel packs
4. Place the device in the bowl, making sure that the charging port is in contact with the substance
5. Leave the device in the bowl for at least 12 hours to allow the substance to absorb the moisture
6. Remove the device from the bowl and let it air dry

Note: Make sure that none of the rice or silica gel packs go inside the charging port as it can further damage the device.

Use a Vacuum Cleaner on Low Power

Using a vacuum cleaner on low power to suction out water is another effective method. Here’s how to do it:

1. Turn off your device
2. Insert the end of the vacuum hose in the charging port
3. Use low suction power to suction out any remaining water
4. Let the port air dry completely before plugging in any charger or cord

Make sure to avoid using high suction power, which can damage the device.

Use a Can of Compressed Air

Using compressed air can blow out any remaining water droplets stuck in the charging port. Here’s how to use it:

1. Turn off your device
2. Hold the can of compressed air at least one foot away from the device
3. Insert the nozzle into the charging port
4. Blow air into the port, making sure that any water droplets are removed
5. Let the port air dry completely before plugging in any charger or cord

If All Else Fails, Seek Professional Help

If none of these methods work, seek professional help from a reputable repair shop. Here are some tips to keep in mind:

• Do your research to find a trusted repair shop
• Be aware of the costs and ask for a quote before authorizing any work
• Make a backup of your device’s data before handing it over for repair
• Ask questions about the repair process to understand what is being done to your device

Conclusion

Whether you dropped your device in water or spilled something on it, water in the charging port can be a frustrating problem. However, there are several ways you can remove water from the charging port on your own. Remember to always be gentle with your device and use a method that is safe and effective. With these tips, your device will be up and running in no time, and you can stay connected to the world around you.