All
credit card orders are processed by CCNow. Customers can be sure that all information
supplied are secured and will not be used for any other
purpose other than this sale transaction. MN customers
in USA are recommended
to use paypal
Please
note that credit card order (minimum order $11.50 excluding postage) can only
be sent to card holder at his/her registered address. We may not be able to process
credit card orders for card issued by some countries. In that case or if you do
not have a credit card, please see other methods of payment
including paypal MN
customers in USA are
recommended to use paypal
Supported devices: PPC -
Compaq IPAQ, HP Jornada 540 Series, Casio EM-500, E-115, E-125, running Win CE3.0.
(Other CE3.0 devices should also work but had not been tested, CE2.11 devices
may or may not work) Phones
- SONY
CMD-Z5 , CMD-J5/Z7,
SIEMENS C/M/S35i, S/SL45
(with S25D) Data
Cable - S25D, SNZ5D, SNDJ5 PPC
to phone cables - PCZ5M/PCJ5M/PCS3M/PQZ5M/PQJ5M/PQS3M/PJZ5M/PJJ5M/PJS3M
Other phones, data
cables or PPC have not been tested at present.
Information
provided here are specific for the above combinations of hardware (our own cables)
only. Other makes may or may not work.
There
are different types of NULL MODEM adapters for different hardware. If you like
to make one yourself, see detail. We
have produced this compact Null Modem Adapter specially for our cables:
Null
Modem Adapter for connection between PPC Serial Sync Cable and Phone data cable
(SNZ5D/SNDJ5/S25D)
(please note our minimum
credit card order is $11.50 excluding postage. If you have bought the above data
cables from us before we can waive this condition but it becomes expensive as
$5 postage has to be added to each order)
(For
IPAQ/HP
owners without a serial sync cable, you may like to purchase our RS-232 serial
modem cable - PQSM/PHJSM (this is NOT a sync cable),
then you will not need a null modem adapter, as it will connect the IPAQ/Jornada
and SNZ5D/S25D/SNDJ5
directly). Direct
PPC to Phone cable is best.
Different
phones are configured differently, as follow: You
may copy and print this for private use
SONY
CMD-Z5/J5/Z7 Important:
CMD-Z5/J5 is NOT configured for data by default. If
you have not used the phone for data before, you must
configure it: Settings>Call
settings>Data services>Serial speed>Automatic (press
jog dial) Automatic
serial speed is best for most applications, although almost all speed should work
for data.
1
On the PPC: Settings>Connections>Modem>New Connection> 2
Enter a name for the connection:
e.g. Sony 3
Select a Modem: Hayes
Compatible on Com1 4
Baud Rate: 19200 (you
can experiment higher if your network support compression)
5 TAP
Advanced 6
Data Bits:8
7 Parity:None
8 Stop
Bits: 1 9
Flow Control: Hardware
10
TICK Enter dialing commands
manually 11
TAP TCP/IP and/or Name
Servers to enter necessary settings for your ISP
12
TAP OK to go back to
Make New Connection screen 13
TAP Next 14
Wait for dial tone before dialing
- DO NOT TICK
15
TAP Finish
To
Connect (with all cables/adapter/phone connected and switch on)
16
Programs>Connections 17
TAP on SONY (or other name entered at 2) 18
Type in user name and
password 19
TICK Save password
(if you prefer), then you do not have to enter user name/password again next time.
20
TAP Connect - Manual
Dial Terminal appears, then bring up the keyboard
(handwriting not recommended) 21
(type) at ENTER (bent
arrow), OK should appear on the terminal screen (if not, check all cable connections)
22
(type) at ENTER (bent
arrow) once more, OK should appear on the terminal screen
23
(type) atd12345678 (12345678
is your ISP number) ENTER,
you should now see Z5 is dialing the number. 24
If your ISP is connected (it may not connect first time), terminal screen will
indicate so. Then go on next step or you may have to re-dial again.
25
TAP OK on top right
corner of Manual Dial Terminal
26
The screen of Connected to SONY
is brought up showing the connection status:
authentication process 27
When you hear "plong" and the status shows: connected
- you have successfully connected to your ISP
Now
you can browse with IE.
This may sound complicated
but it is the only way we find which works 100%. If any reader/customer finds
a better way please let us know and we'll
pass on to our readers/customers.
PS: this
instruction is specific for using our SNZ5D /SNDJ5 / PCZ5M / PCJ5M
/PQZ5M / PQJ5M / PJZ5M
/ PJJ5M cable. Other cable (including the original
Sony cable) is very unlikely to work. You may try but you may find that you will
be wasting your time.
SIEMENS C/M/S35i, SL45 (You can connect S35i/SL45 via infra red to almost all PPC WIN
CE3.0 which has infra red. Even so, many would prefer cable connections)
Instruction here is specific to using S25D
/ PCS3M / PQS3M / PJS3M data cable, other cable may
or may not work
1
On the PPC: Settings>Connections>Modem>New Connection> 2
Enter a name for the connection:
e.g. SIEMENS 3
Select a Modem: Hayes
Compatible on Com1 4
Baud Rate: 19200 (you
can experiment higher if your network support compression)
5 TAP
Advanced 6
Data Bits:8
7 Parity:None
8 Stop
Bits: 1 9
Flow Control: Hardware
10
TAP TCP/IP and/or Name
Servers to enter necessary settings for your ISP
11
TAP OK to go back to
Make New Connection screen 12
TAP Next 13
Settings Country
code: leave blank Area
code: leave blank Phone
number: 12345678 (which is your ISP dial up number) 14
Wait for dial tone before dialing
- DO NOT TICK
15
TAP Finish
To
Connect (with all cables/adapter/phone connected and switch on)
16
Programs>Connections 17
TAP on SIEMENS (or other name entered at 2) 18
Type in user name and
password 19
TICK Save password
(if you prefer), then you do not have to enter user name/password again next time.
Suggested
Dialing settings: (change to suit your situations) TAP
Dialing Options Location:
Home Area code: blank
Country code: blank Tone
dialing: CHECK TAP
Dialing Patterns For
local calls, dial: G For
long distance calls, dial: G For
international calls, dial: G TAP
OK and OK
Make
sure Phone: shows the
correct number T12345678,
otherwise check the above dialing settings 20
TAP Connect - Connected
to SIEMENS status screen shows dialing
T12345678, you should also see phone is dialing the
number. 21
If your ISP is connected (it may not connect first time, then you have to re-dial),
the screen of Connected to SIEMENS
shows status:authentication
process 22
When you hear "plong" and the status shows: connected
- you have successfully connected to your ISP
Now
you can browse with IE.
Click Back
button on your browser to go back to previous page If you have questions about
the above products please write to: pcm-info @ pc-mobile.net
