All
credit card orders are processed by CCNow. Customers can be sure that all information
supplied are secured and will not be used for any other
purpose other than this sale transaction. MN customers
in USA are recommended
to use paypal
Please
note that credit card order (minimum order $11.50 excluding postage) can only
be sent to card holder at his/her registered address. We may not be able to process
credit card orders for card issued by some countries. In that case or if you do
not have a credit card, please see other methods of payment
including paypal MN
customers in USA are
recommended to use paypal
February 28, 2006 -
there is a new style/system
for connecting GPS/PDA. It is not interchangeable
with the old style on this pagewhich we have been selling
for a few years and will continue to support previous customers who wish to add/change
interface cables to the ones already owned. The main difference with the new style
is that it is possible to power the GPS and PDA with just one power source with
the new style while you need a power splitter with the old style cables.
If you are buying GPS/PDA connecting cables for the
first time we recommend you choose this new style. -----------------------------------
World exclusive:
Data Cable for Magellan eXplorist
100/200/300 - GS1DC Magellan
eXplorist 100/200/300 are compact/good performance/low cost GPS favoured mostly
by Geocachers. However, they are let down by
the lack of a computer interface thus it is not possible to transfer data with
a PC or PDA as it is. Although we do not expect
large demand, we have decided to support this small community who may require
such and have developed such external interface port for eXplorist 100/200/300.
Such interface will
allow users to: 1. Upgrade firmware 2.
Change basemap (good news for European users)
3. Transfer data to/from PC and PDA 4.
Use navigation software on PC and PDA.
All above require additional software/data and are
available for free or for a fee from many places on the internet. You can find
useful information from this sites: http://rhamphorinkx.newmail.ru/ Note we will not provide any software or software support.
With availability of such interface, it may help Magellan
to sell more of these models!
The data
cable - GS1DC - actually consists of 3
parts:
1. data connector with
data/power jacks
2. connecting cable specially made 2.5>2.5mm plug
3.
locking screw/plate for
securing data connector
protective cover for the pins included
when cable is not in used
Because the data connector
occupies the original battery compartment, you need to power it externally through
the universal 4.0/1.7 DC connector in the data connector. You can use either:
1. Any 5v AC adapter (or car adapter) with universal 4.0/1.7
DC plug, which is used by many electronic devices and PDA such as Ipaq, Toshiba,
Fujitsu Asus, Acer, Axim etc. 2. Through PC USB port by connecting PUC2. 3. Car USB adapter with PUC2 (CKUC)
4. Battery Extender PB4A, if you are using it
outdoors. The data cable - GS1DC - actually
consists of 3 parts:
To connect data connector: 1 remove the rubber cover of the data port
2.
"drop in" the data connector which should sit in place
3. screw in the
locking plate (push the connector right down)
4. now you can connect cable
and power
For other end (PC or PDA) you need appropriate interface
and we support large range. This is what you need in different situations:
(for PDA - Acer n30 is given as example) , AC
means 5V AC adapter with 4.0/1.7 plug.
Connecting to - situation
you need
power
for GPS (suggestion) - also needed
PC - indoor
GS9SF
(GS1DC+G9SF)
PB4A, or PUC2
- through PC USB port, or AC
PDA - indoor (power for PDA NOT needed)
GSAC3
(GS1DC+GAC3)
PB4A, or PUC2
- through PC USB port, or AC
PDA - indoor (power for PDA needed)
GSAC3P
PPY2
+ (PB4A, or PUC2
- through PC USB port)
PDA - outdoor (power for
PDA not needed)
GSAC3 (GS1DC+GAC3)
PB4A
PDA - outdoor (power for PDA needed)
GSAC3P
PB4A
+ PPY2
PDA - in car (power for
PDA not needed)
GSAC3
CKUC
PDA - in car (power for PDA needed)
GPSAC3
included
in the package (GS1DC+GAC3P+CK203+PUC2+PPY2)
Power GPS in car - no connection
GS1D
CKUC
Important: Every time you have
finished using the data cable, switch off the GPS via its power button BEFORE
disconnecting the power cable. Otherwise data you have worked on may be lost before
saving it to the GPS. By switching off the GPS, it will save necessary data before
exit.
See options
available for order New:
We have also introduced a USB cable which also powers the
GPS If you have specific questions about the above products please write to
us at pcmgps @ pc-mobile.net
